Print this page An Introduction to Design of Industrial Ventilation Systems
J. Paul Guyer, P.E., R.A., Fellow ASCE, Fellow AEI
Course Outline
1. INTRODUCTION
1.1 GENERAL CRITERIA
1.2 DESIGN PROCEDURE
1.3 DESIGN CRITERIA
1.4 CONTROLS
1.5 OPERATIONAL CONSIDERATIONS
1.6 COMMISSIONING
2. WOOD SHOP FACILITIES
2.1 FUNCTION
2.2 OPERATIONAL CONSIDERATIONS
2.3 FLOOR PLAN LAYOUT
2.4 DESIGN CRITERIA
2.5 SAFETY AND HEALTH CONSIDERATIONS
3. PAINT SPRAY BOOTHS
3.1 FUNCTION
3.2 OPERATIONAL CONSIDERATIONS
3.3 DESIGN CRITERIA
3.4 FANS AND MOTORS
3.5 REPLACEMENT AIR
3.6 SYSTEM CONTROLS
3.7 RESPIRATORY PROTECTION
This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of the course materials.
Learning Objective
At the conclusion of this course, the student will:
- Learn about the eight steps in the procedure for design of industrial ventilation systems;
- Learn the importance of replacement air and how to provide it in your design;
- Learn the basics of plenum design with and without perforated ducts;
- Learn about the controls needed in basic industrial ventilation systems;
- Learn the importance of operational considerations such as energy conservation, maintenance, noise and respiratory protection;
- Learn about designing floor sweeps for wood working facilities; and
- Learn the basic configuration of walk-in downdraft and drive-thru cross draft paint spray booths.
Intended Audience
This course is intended for engineers, architects and construction professionals who want an introduction to the design of industrial ventilation systems.
Benefit for Attendee
This course will give engineers and others an understanding of some of the basic materials, systems, and configuration information needed to beginning addressing industrial ventilation systems for real projects.
Course Introduction
This is an introduction to the basics you will need to begin designing industrial ventilation systems for facilities such as wood shops and paint spray booths. You will learn about general design criteria, design procedures, controls, operational considerations, health and safety considerations.
About Course Author
Paul Guyer is a registered mechanical engineer, civil engineer, fire protection engineer and architect with over 35 years experience in the design of buildings and related infrastructure. For an additional 9 years he was a senior-level advisor to the California Legislature on infrastructure and capital outlay issues. He has designed and supervised the design of hundreds of construction projects requiring the preparation of detailed working drawings and specifications for federal, state and local public agencies and private companies. He is a graduate of Stanford University and has held numerous national, state and local positions with the American Society of Civil Engineers and National Society of Professional Engineers.
Course Content
The course content is contained in the following PDF file:
An Introduction to Design of Industrial Ventilation Systems
Please click on the above underlined hypertext to view, download or print the document for your study. Because of the large file size, we recommend that you first save the file to your computer by right clicking the mouse and choosing "Save Target As ...", and then open the file in Adobe Acrobat Reader. If you still experience any difficulty in downloading or opening this file, you may need to close some applications or reboot your computer to free up some memory.
Course Summary
For engineers and construction professionals needing an introduction to the basic principles and features of industrial ventilation systems, this course will give you information about general criteria, design procedures, controls, operational considerations, and facility and equipment layout.
Quiz
Once you finish studying the above course content, you need to take a quiz to obtain the PDH credits.
DISCLAIMER: The materials contained in the online course are not intended as a representation or warranty on the part of PDH Center or any other person/organization named herein. The materials are for general information only. They are not a substitute for competent professional advice. Application of this information to a specific project should be reviewed by a registered architect and/or professional engineer/surveyor. Anyone making use of the information set forth herein does so at their own risk and assumes any and all resulting liability arising therefrom.
