Print this page Industrial Ventilation – Practical Concepts and Calculations
Jurandir Primo, PE
Course Outline
This three-hour online course is only an introduction to one of the most important aspects of Ventilation installations tailored for beginners, students, technicians, engineers, contractors and professionals interested in sizing Fans and Blowers.
This course includes
a multiple choice quiz at the end,
Learning Objective
At the conclusion of this course, the student will:
- Understand the formulae and parameters used in the ASHRAE/ACGHI or CAGI Standards as authority on ventilation mechanical design;
- Understand the formulae and parameters used for Fans and Blowers to determine the minimum required air flow process;
- Understand the common terms used for dimensioning ducts, air tanks, driers, filters and air piping inside power plants;
- Be able to learn and recognize air density, altitude, relative humidity, air pressure and other technical terms;
- Know the basic comprehension of the terms used in thermodynamics calculations and remember the main technical concepts;
- Be able of converting metric and imperial unities used in Ventilation calculations;
- Learn the meaning of design equations, Loss Factors and Coefficients of Entry;
- Know the fan basic characteristics, arrangements and standard driving positions; and
- Understand the basic application of hood types, bag filters and pneumatic conveying.
Intended Audience
This course is intended for students, designers, mechanical engineers and professionals interested or working with HVAC, Process Plants and Piping.
Benefit to Attendees
Attendee of this course will be able to understand, calculate, specify and plan a Ventilation equipment installation.
Course Introduction
The student will understand the terms, concepts and the basic principles used in ASHRAE/ACGHI or CAGI Standards specification and codes.
Course Content
In this lesson, you are required to download and study the following course content in PDF format:
Industrial Ventilation – Practical Concepts and Calculations
Please click on the above underlined hypertext to view, download or print the document for your study. Because of the large file size, we recommend that you first save the file to your computer by right clicking the mouse and choosing "Save Target As ...", and then open the file in Adobe Acrobat Reader. If you still experience any difficulty in downloading or opening this file, you may need to close some applications or reboot your computer to free up some memory.
Course Summary
Industrial Ventilation – Practical Concepts and Calculations can be used to give the main guidelines to choose the correct Fans and Blowers types under the ASHRAE/ACGHI or CAGI codes, mandatory requirements, specific prohibitions, non-mandatory guidance, construction activities, calculations and technical formulae.
Related Links
For additional technical information related to this subject, please visit the following websites:
1. American Society of Heating, Refrigeration and Air-Conditioning: www.ashrae.com
2. The Compressed Air and Gas Institute: www.cagi.com
3. ASME Boiler and Pressure Vessel Code: www.asme.com.
4. National Fire Protection Association, NFPA-650: www.nfpa.com
5. OSHA Technical Manual: www.osha.gov
6. Industrial Hygiene, Environmental and Occupation Health: www.acghi.com
7. US Environmental Protection Agency: www.epa.gov
Quiz
Once you finish studying the above course content, you need to take a quiz to obtain the PDH credits.
DISCLAIMER: The materials contained in the online course are not intended as a representation or warranty on the part of PDH Center or any other person/organization named herein. The materials are for general information only. They are not a substitute for competent professional advice. Application of this information to a specific project should be reviewed by a registered architect and/or professional engineer/surveyor. Anyone making use of the information set forth herein does so at their own risk and assumes any and all resulting liability arising therefrom.
