|PDH Online Course Description||PDH Units/
Learning Units (Hours)
J. Paul Guyer, P.E., R.A., Fellow ASCE, Fellow AEI
This publication contains sound pressure and sound power data for mechanical equipment commonly found in many commercial buildings. Where possible, the noise data have been correlated with some of the more obvious noise influencing parameters, such as type, speed, power rating, and flow conditions. The noise levels quoted in this publication are suggested for design uses; these noise levels represent approximately the 80 to 90 percentile values. That is, on the basis of these sample sizes, it would be expected that the noise levels of about 80 to 90 percent of a random selection of equipment would be equal to or less than the design values quoted in the manual, or only about 10 to 20 percent of a random selection would exceed these values. This is judged to be a reasonable choice of design values for typical uses. Higher percentile coverage, such as 95 percent, would give increased protection in the acoustic design, but at greater cost in weight and thickness of walls, floors, columns, and beams. On-site power plants driven by reciprocating and gas turbine engines have specific sound and vibration problems, which are considered separately elsewhere.
This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of the course materials.
NY PE & PLS: You must choose courses that are technical in nature or related to matters of laws and ethics contributing to the health and welfare of the public. NY Board does not accept courses related to office management, risk management, leadership, marketing, accounting, financial planning, real estate, and basic CAD. Specific course topics that are on the borderline and are not acceptable by the NY Board have been noted under the course description on our website.
AIA Members: You must take the courses listed under the category "AIA/CES Registered Courses" if you want us to report your Learning Units (LUs) to AIA/CES. If you take courses not registered with AIA/CES, you need to report the earned Learning Units (not qualified for HSW credits) using Self Report Form provided by AIA/CES.