2008 National Electric Code
Thomas Mason, PE
The course exactly follows the structure of the 2008 National Electrical Code (with some digressions to connect related rules). The Preface, Introduction and Definitions are explained as very special parts of the code, with detailed discussion of the rules beginning in the Definitions section.
Requirements for electrical installations, ground conductors and grounding, feeders and branch circuits, services, overcurrent protection, surge protection devices, conductors, industrial control panels, transformers and reactors, low-voltage wiring and data communications are addressed. Residential design and fine points of specialized areas, such as electrical processes are not addressed. Examples are given from waste water treatment plants and general manufacturing.The course is also available in audio (.mp3) format E260U and live-online webinar ™ format E260W.
The course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of the course materials.
At the conclusion of this course, the student will:
This course is intended for project managers, electrical engineers, engineers and Architects who work with electrical engineers and contractors who must deal with electrical inspectors.
Benefit to Attendees
It is the job of electrical designers to meet the sometimes peculiar requirements of the National Electrical Code. This course is intended to help them be aware of the requirements, how they are generally interpreted and, just a little, how to meet them. Project managers, architects and supervisors need a passing understanding of the mindset of the National Electrical Code and some recent problems with inspectors that can be avoided. Contractors are always looking for more economical ways to complete a project. This course helps focus on problem areas, but it is not a design guide.
This three hour online course reviews the 2008 version of NFPA 70, the National Electrical Code, in common English. Because the book is so massive, only topics found critical or difficult to understand in the author’s experience are included. Other content of the Code is indicated, but not pursued. The presentation follows that in the Code and sections discussed are cited.
You must have access to a copy of the2008 National Electrical Code to checkthe exact wording of requirements for your immediate design and construction questions. It is not intended that a copy is needed at your computer when you takethis course and quiz.
In this lesson, you are required to download and study the following course content in PDF format:
Please click on the above underlined hypertext to view, download or print the document for your study. Because of the large file size, we recommend that you first save the file to your computer by right clicking the mouse and choosing "Save Target As ...", and then open the file in Adobe Acrobat Reader. If you still experience any difficulty in downloading or opening this file, you may need to close some applications or reboot your computer to free up some memory.
This course attempted to review new and critical sections of the 2008 National Electrical Code. It did not include exercises in calculating the minimum size for junction boxes, based upon number and size of conductors. Unfortunately, space was not available to review many of the very basic principles which have not changed for many, many revisions, such as sizing motor circuits and motor controls. Fortunately, though, PDHonline.com offers a wide range of electrical courses which do address these needs. After you have recovered from the current exercise, please spend a few minutes reviewing the other PDHonline.com courses available.
Related Links and References
For additional technical information related to this subject, please visit the following websites or web pages:
www.NFPA.com - The National Fire Protection Association sells the Code, Code Handbook related standards and training materials
www.IAEI.com - the International Association of Electrical Inspectors is a very highly-regarded voluntary organization with excellent publications and many local chapters
www.NECA-NEIS.com - The National Electrical Contractors Association, in association with the International Brotherhood of Electrical Workers publishes a series of very readable guides on the installation of different types of equipment. ANSI/NECA 1-200, Standard Practices for Good Workmanship in Electrical Contracting is cited in NEC section 110.12.
www.MikeHolt.com - Mike Holt writes extensively on electrical design and construction issues and has a library of training materials available.
www.JoeTedesco.com - Joe Tedesco is another prolific expert in electrical construction.
www.BrainFiller.com - Jim Phillips has a training organization focused on very current, somewhat difficult electrical design problems. He has a remarkable ability to focus on core objectives and translate problems in cookbook solutions. He also writes for NFPA publications.
Once you finish studying the above course content, you need to take a quiz to obtain the PDH credits.