Print this page Print this page

Expedited Nuke Cert

Ed Yung, PE & Pilot

Course Outline

This one hour on-line PDH course includes a quiz which is intended to enhance the reader's understanding of the course materials.

It includes examples of types of equipment that are applicable for nuclear plants, & distinguishes between types of service.

The course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of the course materials.

Learning Objectives

At the conclusion of this course, the student will:

Intended Audience

Manufacturing plant Management
Manufacturing plant Engineering
Manufacturing plant Marketing Manager
Manufacturing plant Comptroller

Benefit to Attendees

Manufacturers may find a practical new market for their products
Manufacturers may find a high profit margin outlet for their products

Course Introduction

The primary purpose of this PDH Course is to inform Engineers of a quick & easy way to obtain approval to place any type device in the containment area of a NUKE plant.

Any product used for any purpose within the containment area of any NUKE plant must be certified for that specific use.

It became necessary to simplify & expedite the original excessively complex & restrictive Nuclear (NUKE) certification procedure.  The reason for this is given in paragraph 3 in the attachment.

A comprehensive discussion of a little known means of obtaining a legal, effective shortcut for obtaining a NUKE certification follows.  This includes a comparison of conventional & shortcut NUKE cert. & describes the resulting major reduction & simplification of the paperwork & procedures required.

Course Content

In this lesson, you are required to download and study the following course content:

Expedited Nuke Cert

Please click on the above underlined hypertext to view, download or print the document for your study.

Course Summary

An abbreviated or shortcut NUKE certification procedure permits manufacturers to produce a safe and legal NUKE product with a quality system such as the ASME type.


Once you finish studying the above course content, you need to take a quiz to obtain the PDH credits.

Take a Quiz

DISCLAIMER: The materials contained in the online course are not intended as a representation or warranty on the part of PDH Center or any other person/organization named herein. The materials are for general information only. They are not a substitute for competent professional advice. Application of this information to a specific project should be reviewed by a registered architect and/or professional engineer/surveyor. Anyone making use of the information set forth herein does so at their own risk and assumes any and all resulting liability arising therefrom.