Print this page Control and Inspection of Structural Earthwork Construction
George E. Thomas, PE
Course Outline
This course presents information on the control of construction from the soils standpoint, for both foundation treatment and compaction control of fills. In addition to a general treatment of the subject applicable to all types of earthwork, separate sections are devoted to problems of rolled earth dams, canals, and miscellaneous construction features. Information on design features and specifications provisions are given to provide background to assist in implementing various control and inspection techniques.
This course is based on chapter three of the Earth Manual, Third Edition, written by the U.S. Department of Interior.
This course includes
a multiple choice quiz at the end,
Learning Objective
At the conclusion of this course the student will have gained an understanding of:
- Principles of Construction Control;
- Principles of Inspection;
- Field Laboratory Facilities;
- Laboratory Testing and Data Collection;
- Reporting Requirements;
- Various Types of Embankments;
- Dumping Fill;
- How to Select Fill;
- Rolled Earth fill;
- Blended Earth fill;
- Modified Soil Fill;
- Hydraulic Fill;
- Miscellaneous Fills;
- Rock Blankets;
- Sand and Gravel Blankets;
- Impervious Blankets and Linings;
- Topsoil Blankets or Zones;
- Embankment Dam Instrumentation;
- Subgrades and Foundations for Embankments and Compacted Earth Lining;
- Pipeline Construction;
- Structure Foundations on Soil or Rock;
- Pile and Drilled Shaft Foundations;
- Soil Compaction techniques;
- Compacted Soil and Lime;
- Soil Stabilization;
- Soil-Cement Slurry Pipe Bedding;
- Highway and Railroad Construction;
- Riprap Placement;
- Embankment Dams;
- Canals;
- Drainage Ditches; and
- Specifications Provisions.
Intended Audience
Civil Engineers, Structural Engineers, and Construction Contractors
Benefit to Attendees
The course will provide an understanding of Earthwork Control and Inspection and will discuss the various materials, tools and equipment used in the field and laboratory.
Course
Introduction
This course is intended to improve your engineering knowledge related to the control and inspection of large earthwork projects.
Course
Content
In this lesson, you are required to download and study the following course content in PDF format:
Control and Inspection of Structural Earthwork Construction
Please click on the above underlined hypertext to view, download or print the document for your study. Because of the large file size, we recommend that you first save the file to your computer by right clicking the mouse and choosing "Save Target As ...", and then open the file in Adobe Acrobat Reader. If you still experience any difficulty in downloading or opening this file, you may need to close some applications or reboot your computer to free up some memory.
Course Summary
This course presents information on the control of construction from the soils standpoint, for both foundation treatment and compaction control of fills.
Quiz
Once you finish studying the above course content, you need to take a quiz to obtain the PDH credits.
DISCLAIMER: The materials contained in the online course are not intended as a representation or warranty on the part of PDH Center or any other person/organization named herein. The materials are for general information only. They are not a substitute for competent professional advice. Application of this information to a specific project should be reviewed by a registered architect and/or professional engineer/surveyor. Anyone making use of the information set forth herein does so at their own risk and assumes any and all resulting liability arising therefrom.
